Enervista Ur Setup Software; Requirements; Software Installation - GE B90 Instruction Manual
Ur series
low impedance bus
differential system
Hide thumbs
Also See for B90:
- Instruction manual (510 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (440 pages)
Table of Contents
Advertisement
1.3 ENERVISTA UR SETUP SOFTWARE
1.3ENERVISTA UR SETUP SOFTWARE
1
The faceplate keypad and display or the EnerVista UR Setup software interface can be used to communicate with the relay.
The EnerVista UR Setup software interface is the preferred method to edit settings and view actual values because the PC
monitor can display more information in a simple comprehensible format.
The following minimum requirements must be met for the EnerVista UR Setup software to properly operate on a PC.
•
Pentium class or higher processor (Pentium II 300 MHz or higher recommended)
•
Windows 95, 98, 98SE, ME, NT 4.0 (Service Pack 4 or higher), 2000, XP
•
Internet Explorer 4.0 or higher
•
128 MB of RAM (256 MB recommended)
•
200 MB of available space on system drive and 200 MB of available space on installation drive
•
Video capable of displaying 800 x 600 or higher in high-color mode (16-bit color)
•
RS232 and/or Ethernet port for communications to the relay
The following qualified modems have been tested to be compliant with the B90 and the EnerVista UR Setup software.
•
US Robotics external 56K FaxModem 5686
•
US Robotics external Sportster 56K X2
•
PCTEL 2304WT V.92 MDC internal modem
After ensuring the minimum requirements for using EnerVista UR Setup are met (see previous section), use the following
procedure to install the EnerVista UR Setup from the enclosed GE EnerVista CD.
1.
Insert the GE EnerVista CD into your CD-ROM drive.
2.
Click the Install Now button and follow the installation instructions to install the no-charge EnerVista software.
3.
When installation is complete, start the EnerVista Launchpad application.
4.
Click the IED Setup section of the Launch Pad window.
5.
In the EnerVista Launch Pad window, click the Add Product button and select the "B90 Low Impedance Bus
Differential System" from the Install Software window as shown below. Select the "Web" option to ensure the most
recent software release, or select "CD" if you do not have a web connection, then click the Add Now button to list
1-6
B90 Low Impedance Bus Differential System
1 GETTING STARTED
1.3.1 REQUIREMENTS
1.3.2 SOFTWARE INSTALLATION
GE Multilin
Advertisement
Table of Contents
