User-Programmable Leds - GE B90 Instruction Manual

5 SETTINGS
c) ANALOG CHANNELS

PATH: SETTINGS PRODUCT SETUP
 ANALOG CHANNELS

MESSAGE
MESSAGE
MESSAGE
These settings select the metering actual value recorded in an oscillography trace. The length of each oscillography trace
depends in part on the number of parameters selected here. Parameters set to "Off" are ignored. The parameters available
in a given relay are dependent on:
• The type of relay,
• The type and number of CT/VT hardware modules installed, and
• The type and number of analog input hardware modules installed.
Upon startup, the relay will automatically prepare the parameter list. A list of all possible analog metering actual value
parameters is presented in Appendix A: FlexAnalog parameters. The parameter index number shown in any of the tables is
used to expedite the selection of the parameter on the relay display. It can be quite time-consuming to scan through the list
of parameters via the relay keypad and display - entering this number via the relay keypad will cause the corresponding
parameter to be displayed.
If there are no CT/VT modules and analog input modules, no analog traces will appear in the file; only the digital traces will
appear.
a) MAIN MENU

PATH: SETTINGS PRODUCT SETUP
 USER-PROGRAMMABLE
 LEDS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
GE Multilin
 
OSCILLOGRAPHY ANALOG CHANNELS
ANALOG CHANNEL 1:
Off
ANALOG CHANNEL 2:
Off
ANALOG CHANNEL 3:
Off
↓
ANALOG CHANNEL 16:
Off


USER-PROGRAMMABLE LEDS

 LED TEST

 TRIP & ALARM LEDS

 USER-PROGRAMMABLE
 LED 1
 USER-PROGRAMMABLE
 LED 2
↓
 USER-PROGRAMMABLE
 LED 48
B90 Low Impedance Bus Differential System
5.2 PRODUCT SETUP
Range: Off, any FlexAnalog parameter
See Appendix A for complete list.
Range: Off, any FlexAnalog parameter
See Appendix A for complete list.
Range: Off, any FlexAnalog parameter
See Appendix A for complete list.
Range: Off, any FlexAnalog parameter
See Appendix A for complete list.
5.2.10 USER-PROGRAMMABLE LEDS
See below.
See page 5–40.
See page 5–40.
5
5-37