Remote Devices - GE B90 Instruction Manual

6 ACTUAL VALUES
a) STATUS

PATH: ACTUAL VALUES STATUS
 REMOTE DEVICES
 STATUS
MESSAGE
MESSAGE
MESSAGE
The present state of the programmed remote devices is shown here. The
whether or not all programmed remote devices are online. If the corresponding state is "No", then at least one required
remote device is not online.
b) STATISTICS

PATH: ACTUAL VALUES STATUS
 REMOTE DEVICE
1

MESSAGE
Statistical data (two types) for up to 16 programmed remote devices is shown here.
The StNum number is obtained from the indicated remote device and is incremented whenever a change of state of at
least one DNA or UserSt bit occurs. The SqNum number is obtained from the indicated remote device and is incremented
whenever a GSSE message is sent. This number will rollover to zero when a count of 4 294 967 295 is incremented.

PATH: ACTUAL VALUES STATUS
 FLEX STATES

MESSAGE
MESSAGE
There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.
GE Multilin

REMOTE DEVICES STATUS
All REMOTE DEVICES
ONLINE: No
REMOTE DEVICE 1
STATUS: Offline
REMOTE DEVICE 2
STATUS: Offline
↓
REMOTE DEVICE 16
STATUS: Offline

REMOTE DEVICES STATISTICS
REMOTE DEVICE 1
StNum:
REMOTE DEVICE 1
SqNum:

FLEX STATES
PARAM 1: Off
Off
PARAM 2: Off
Off
↓
PARAM 256: Off
Off
B90 Low Impedance Bus Differential System
Range: Yes, No
Range: Online, Offline
Range: Online, Offline
Range: Online, Offline
ALL REMOTE DEVICES ONLINE

REMOTE DEVICE 1(16)
0
0
Range: Off, On
Range: Off, On
Range: Off, On
6.2 STATUS

6.2.7 REMOTE DEVICES

message indicates
6.2.8 FLEX STATES
6-5
6