GE B90 Instruction Manual page 413
Ur series
low impedance bus
differential system
Hide thumbs
Also See for B90:
- Instruction manual (510 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (440 pages)
Table of Contents
Advertisement
APPENDIX C
–
Bad state (11) is indicated when the
•
XCBR1.ST.BlkOpn: This is the state of the block open command logic. When true, breaker open commands from IEC
61850 clients will be rejected.
•
XCBR1.ST.BlkCls: This is the state of the block close command logic. When true, breaker close commands from IEC
61850 clients will be rejected.
•
XCBR1.CO.Pos: This is where IEC 61850 clients can issue open or close commands to the breaker. SBO control with
normal security is the only supported IEC 61850 control model.
•
XCBR1.CO.BlkOpn: This is where IEC 61850 clients can issue block open commands to the breaker. Direct control
with normal security is the only supported IEC 61850 control model.
•
XCBR1.CO.BlkCls: This is where IEC 61850 clients can issue block close commands to the breaker. Direct control
with normal security is the only supported IEC 61850 control model.
GE Multilin
and
BREAKER 1 OPEN
B90 Low Impedance Bus Differential System
C.2 SERVER DATA ORGANIZATION
operands are Off.
BREAKER 1 CLOSED
C
C-5
Advertisement
Table of Contents
