Connect Usb Client; Connect Serial Device - Honeywell Thor VM1 User Manual

1. Seat the D9 connector firmly over the USB Connector on the Quick Mount Smart Dock.
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The USB-host connector provides a connector for a USB device such as a USB thumb drive.
4. Secure the cables to the Thor VM1 with

Connect USB Client

D9 Connector
See USB Connector (page 10-5) for connector pinouts.
1. Seat the D9 connector firmly over the USB Connector on the Quick Mount Smart Dock.
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
3. The USB client connector provides a client connection, such as for ActiveSync to a PC.
4. Secure the cables to the Thor VM1 with

Connect Serial Device

Note: Pin 9 of the desired COM port must be configured to provide +5V or RI as needed for the connected device. See the
Thor VM1 Reference Guide for details.
See COM1 and COM2 Connector
1. Seat the cable end connector firmly over the serial COM port on the Quick Mount Smart Dock.
2. Turn the thumbscrews in a clockwise direction. Do not over tighten.
3. Secure the cables to the Thor VM1 with
4. Connect the other cable end to the desired serial device.
4 - 34
Strain Relief Cable Clamps
USB Host Connector
USB Client Connector
Strain Relief Cable Clamps
(page 10-4) for connector pinouts.
Strain Relief Cable Clamps
(page 4-13).
(page 4-13).
(page 4-13).