Preferences - Honeywell Thor VM1 User Manual

Preferences

Administration
By default, Keep settings unlocked for 10 minutes is disabled (checkbox is blank).
Application
Startup
Shutdown
Activity Log
Log Level
Display Level Use this option to control the level of detail shown on the main Enabler screen. The default is Basic
7 - 8
Behavior of the Enabler when the Thor VM1 boots up. The default is Monitor for Updates.
• Do not Monitor - When the device boots, do not launch the Enabler application and do not attempt
to connect to the Mobile Device Server.
• Monitor for Updates - Attempt to connect to the Mobile Device Server and process any updates
that are available. Do not launch the Enabler application.
• Launch User Interface - Attempt to connect to the Mobile Device Server and process any updates
that are available. Launch the Enabler application.
Behavior of the monitor when the Enabler is exited. The default is Monitor for Updates.
• Monitor for Updates - Attempt to connect to the Mobile Device Server and process any updates
that are available. Do not launch the Enabler application.
• Exit Application - Terminates the monitor (requires successful password entry if a password has
been configured).
Use this option to control the level of detail recorded in the log file. The default is No Activity Log.
• No Activity Log - No log file is written.
• Critical - Only critical errors written to the log files.
• Error - Communication or configuration problems are written to the log file along with critical
messages.
• Warning - Possible operation problems are written to the log file along with critical and error
messages.
• Info - Operational information is written to the log file.
• Debug - The most detailed log file.
Output.
• Basic Output - General information is displayed.
• Critical - Critical errors are displayed in addition to those above.
• Error - Communication or configuration problems are displayed in addition to those above.
• Warning - Possible operation problems are displayed in addition to those above.
• Info - Operational information is displayed in addition to those above.
• Debug - The most detailed list is displayed.