Connect A Tethered Scanner; Connect Headset Cable - Honeywell Thor VM1 User Manual

Connect a Tethered Scanner

1. The scanner cable is attached to either the COM1 or COM2 port on the Quick Mount Smart Dock.
2. Connect the serial cable for the scanner as directed above.
3. When the Thor VM1 is powered on, it provides power to the serial scanner.
4. Configure the Data Collection (DC) Wedge to manipulate scanned data as desired.

Connect Headset Cable

The CANbus/Audio connector supports a headset adapter cable or a CANbus cable. The Thor VM1 does not support con-
necting audio and CANbus simultaneously.
Headphones
Microphone
See CANbus / Audio Connector
1. Seat the D15 cable end connector firmly over the CANbus/Audio Connector on the Quick Mount Smart Dock.
2. Tighten the thumbscrews in a clockwise direction. Do not over tighten.
click!
3. Slide the cable ends together until they click shut. Do not twist or bend the connectors. The Thor VM1 internal
microphone and speakers are automatically disabled when the headset is connected.
To Audio cable
(page 10-6) for connector pinouts.
To headset
To Audio
connector
on dock
4 - 35