Quick Mount Smart Dock - Honeywell Thor VM1 User Manual

7. Set terminal emulation parameters.
8. Set AppLock parameter via the
9. Set DCWedge parameters via the
10. Save Changes to the Registry
11. Set Date / Time

Quick Mount Smart Dock

The Thor VM1 assembly consists of two parts, the Thor VM1 computer and the Quick Mount Smart Dock.
The Thor VM1 contains an internal UPS battery that, once fully charged, powers the Thor VM1 for a minimum of 30 minutes
when the unit is not mounted in the dock.
The dock provides:
• A mount for the Thor VM1 computer. The dock attaches to a vehicle via a RAM or U-bracket mount or to a RAM table stand
for use in an office environment.
• Conditioned power for the Thor VM1. The dock accepts 10-60VDC power input directly or 50-150VDC power input with a DC/
DC converter.
• COM1 and COM2 serial connections for a tethered scanner, printer, PC connection, etc.
• USB host and client connections via an adapter cable.
• CANbus connection via an adapter cable.
• Headset connection via an adapter cable. When a headset is not attached, the microphone and speakers on the Thor VM1
are active.
• Strain relief cable mounts.
• Mobility of the Thor VM1, since the dock remains attached to the vehicle the Thor VM1 computer can easily be moved from
one vehicle equipped with a dock to another.
External antenna connectors may be present on the back of the Thor VM1. The connectors may include:
• 802.11 antenna connectors, used when the Thor VM1 is not equipped with internal antennas.
• External GPS antenna connector, when the Thor VM1 is equipped with GPS.
• External WWAN antenna connectors, when the Thor VM1 is equipped with WWAN. Optional WWAN radio (available in North
America, Europe, New Zealand, and Australia only).
Administration
Data Collection
(page 5-2).
(page 5-56) if not set during first boot.
(page 5-19) control panel.
(page 5-39) control panel.
2 - 3