Connect Power; Power Cable Cautions - Honeywell Thor VM1 User Manual

Connect Power

Power options include:
• 12-48 VDC Vehicles (10-60 VDC Direct Connection)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of Lid)
DC power supply.
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)
DC power supply.
• VX6 / VX7 Adapter Cable
VX7.
• Thor VX8 / Thor VX9 Adapter Cable
installed Thor VX8 or Thor VX9.
• Screen Blanking (see page 4-30) - Optional connection to blank the Thor VM1 display while the vehicle is in motion.
• External AC/DC Power Supply
as in an office environment.
See Power Supply Connector

Power Cable Cautions

CAUTION - When routing the power cable:
• Route power cable away from the outside of the fork truck.
• Choose a mounting location so that the power cable does not extend outside the vehicle and that provides sufficient
clearance so that the power cable (especially the dock connector end) is not pressed against part of the vehicle.
• Use the proper
• The power cable is less flexible in low temperature environments. Avoid sharp bends.
Regularly inspect power cable for damage, especially in low temperature environments. Contact
Assistance (page 11-1) for replacement cable options.
Power Cable Routing
Power cable with straight connector
4 - 14
(see page 4-28) - For applications where the Thor VM1 replaces a previously installed VX6 or
(see page 4-29) - For applications where the Thor VM1 replaces a previously
(see page 4-33) - For use when DC power is not available to power the Thor VM1, such
(page 10-4) for connector pinout
Strain Relief Cable Clamps
Avoid sharp bends in this
area of the power cable
(see page 4-15) - Direct connection to vehicle power.
(see page 4-20) - Requires the use of a DC/
(see page 4-24) - Requires the use of a DC/
(page 4-13) to secure cable.
Power cable with right-angle connector
Technical