Backlights And Indicators; Display Backlight; Power Management; Backlight Brightness - Honeywell Thor VM1 User Manual

Vehicle-mount computer with microsoft windows embedded ce 6.0
Hide thumbs Also See for Thor VM1:
Table of Contents

Advertisement

Backlights and Indicators

Display Backlight

There are several configuration options for the Thor VM1 display backlight:

Power Management

The display backlight is controlled by power management. When the user activity timer expires, the display backlight is
turned off. Timeouts can be set for the available power management schemes.
See
Power
(page 5-84) for configuration options.

Backlight Brightness

The intensity of the display backlight can be manually configured:
• Use the 2nd + F7 keppress to increase backlight brightness or the 2nd + F8 keypress to decrease backlight
brightness.
Refer to the
Screen Control

Screen Blanking

The Thor VM1 can be configured to blank (blackout) the display while the vehicle is in motion.
Refer to the
Screen Control

Keypad Backlight

By default, the integrated keypad backlight follows the display backlight. The integrated keypad backlight can be disabled.
To change this behavior, see the Misc tab of the

Speaker Volume

The speaker volume can be adjusted via the Thor VM1 keypad:
• Use the 2nd + F9 keppress to increase speaker volume or the 2nd + F10 keypress to decrease speaker volume.
The current volume level can be viewed on the
adjust speaker volume.
2 - 6
(page 5-88) panel for the current display brightness level.
(page 5-88) panel for information.
Options
(see page 5-78) control panel.
Mixer
(page 5-74) control panel. This control panel can also be used to

Advertisement

Table of Contents
loading

Table of Contents