Honeywell Thor VM1 User Manual page 123

Vehicle-mount computer with microsoft windows embedded ce 6.0
Hide thumbs Also See for Thor VM1:
Table of Contents

Advertisement

Bluetooth Device List
The discovered paired devices may or may not be identified with an icon. Discovered devices without an icon can
be paired as a Scanner or a Printer. The Bluetooth panel assigns an icon to the device name.
An icon with a red background indicates the device's Bluetooth connection is inactive.
An icon with a white background indicates the device is connected to the Thor VM1 and the device's Bluetooth
connection is active.
Double-tap a device in the list to open the device properties menu. The target device does not need to be active.
Clear Button
Deletes all devices from the Device table that are not currently paired. A dialog box is presented, "Delete all dis-
connected devices? Yes/No". Tap the Yes button to remove disconnected or deleted devices from the device
table. The devices are removed from the Device table after any reboot sequence or after closing and reopening
the Bluetooth panels. Tap the No button to make no changes. See Clear Pairing Table on Boot on the
(page 5-33) tab.
Bluetooth Device Menu
Pre-requisite: The Discover button has been clicked and there are Bluetooth devices listed.
Click on a device in the list to highlight it. Double-click the highlighted device to display the Bluetooth Device right-
click menu. The Bluetooth device does not need to be active.
Filtered Mode Enabled
Right-Click Menu Options
Pair as Scanner
Pair as Printer
Pair as Serial Device Communicate with the highlighted serial Bluetooth device. This option is available
Disconnect
Delete
Properties
Filtered Mode Disabled
Receive data from the highlighted Bluetooth scanner or Bluetooth imager.
Send data to the highlighted Bluetooth printer.
when Filtered Mode is disabled.
Stop the connection between the Thor VM1 and the highlighted paired Bluetooth de-
vice.
Remove an unpaired device from the Bluetooth device list. The highlighted device
name and identifier is removed from the Thor VM1 Bluetooth Devices panel after the
user taps OK.
More information on the highlighted Bluetooth device.
Reconnect
5 - 31

Advertisement

Table of Contents
loading

Table of Contents