Ndislog; Options - Honeywell Thor VM1 User Manual

start Starts the Netlog process of logging the network traffic.
stop Stops Netlog from logging network traffic.
unload Unloads Netlog.

Options

Options Function
pkt_size in Specifies the maximum packet size captured in bytes. This option should only be run after you have
bytes called load and stop. Default is 5000.
cap_size in Specifies the maximum size of Netlog0.cap or Netlog1.cap in bytes. This option should only be run
bytes after you have called load and stop. Default is 500,000.
.cap file Specifies the name of the file to which network traffic information is saved. This option should only
be run after you have called load and stop. Default is \netlog.
Run cmd
Performs the command selected. For example, to run Netlog and modify the packet size do the following:
1. Select load from the Commands list and click the Run cmd button.
2. Select stop from the Commands list and click the Run cmd button.
3. Select options from the Commands list, enter the new packet size in the Options list and click the Run cmd
button.

NDISLog

NDISLog creates a .TXT file that can be viewed with any text editor program that supports .TXT files.
Command
Command
start
stop
file
Specifies the name of the file to which NDISLog information is stored.
Save File
Stores the file name.
Run cmd
Performs the selected start or stop command.
Function
Starts logging the network traffic.
Stops logging network traffic.
5 - 77