Connect Accessories; Connect Power - Honeywell Thor VM3 Quick Start Manual

Connect Accessories

Connect serial accessories, such as a bar code scanner, to the
COM1 or COM2 port on the Smart Dock.
Connect the optional VMT keyboard to the USB1 port on the Smart
Dock.
Connect other USB accessories to the optional VM3052CABLE
adapter cable which attaches to the USB2 port.

Connect Power

The Thor VM3 can be connected to vehicle power as follows:
• Direct power connection (12-48VDC vehicles). See Connecting
the Power Cable, below.
• Replace a previously installed VX6/VX7 or Thor VX8/VX9 with an
adapter cable. See the Thor VM3 User's Guide, available at
www.honeywellaidc.com.
• High voltage forklifts (over 60V). Refer to the Thor VM3 User's
Guide available at www.honeywellaidc.com.