ADEMCO 5110XM Installation Instructions Manual page 55

DOWNLOAD
INFORMATION
( 94,
*
TO EXIT
PROGRAMMING MODE
( 98 or
*
*85 ZONES 1-7 BELL & AUX. RELAY ACTIVATION
1
0 = none (default for 6 and 7); 1 = bell only (default for 1-5) 2 = aux.
relay only; 3 = bell & aux. relay
*86 ZONES 10-12, 95 and 96 BELL & AUX. RELAY ACTIVATION
0
10
0 = none (default) ; 1 = bell only; 2 = aux. relay only; 3 = bell & aux.
relay
94 DOWNLOAD PHONE NUMBER
*
Enter up to 12 digits;
95)
*
| | | | | | | | | | |
0–9, # +11 for "
spaces. End field by entering
95 RING DETECTION COUNT FOR DOWNLOADING
*
Enter number of rings before control picks up phone line (or 0 or 15).
Refer to the chart below and program this field accordingly.
Answering
Machine
*96 INITIALIZE DOWNLOAD ID AND SUBSCRIBER ACCT. No. FOR
DOWNLOADING
(No data entry required, press *96)
* 97 SET ALL PROGRAM FIELDS TO DEFAULT VALUES
(No data entry required, pressing *97 automatically loads all defaults).
98 EXITS PROGRAMMING MODE and prevents re-entry by :
*
Master Code + 8 + 0
99)
*
* 99 EXITS PROGRAMMING MODE and allows re-entry by:
Master Code + 8 + 0 or by: Power-up then "*" and "#".
2 3 4 5
11 12 95
", # + 12 for "#", # + 13 for a pause. Do not fill unused
*
. To clear entries from field, press *94* .
*
Downloading
No No
Yes No
No Yes
Yes Yes
–55–
6 7
96
Field * 95 Programming
Set for value of "0"
Set for value of "0"
Set for value other than "0" (1–14).
"15" to bypass answering machine.