ADEMCO 5110XM Installation Instructions Manual page 4

HOW TO USE THIS MANUAL
This manual is written to accommodate both the new and the experienced installer of
Ademco products. A general description of the entire system is located at the
beginning of the manual. The wiring and physical setup of the hardware follows.
The sections at the core of the manual include both hardware setup and programming
requirements of each device to make that specific device operational in the system. A
checkout procedure is included at the end of each section. We recommend this method
to ensure that each device is working properly before proceeding to the next section. It
must also be used if you are making a particular addition to the system of one of these
devices.
Each of the sections covering the installation of peripheral devices includes the
programming for that device. Without an understanding of the programming of the
system, you will not be able to successfully perform the required programming in each
of these sections. We therefore urge you to read the Mechanics of Programming
section before any programming is performed.
If you are an experienced user of Ademco products, you may choose to wire and then
program the entire system at once. If so, refer to the Mechanics of Programming
section and the Data Field Descriptions section after the hardware setup is complete.
A blank pull-out programming form is included with this manual.
This manual uses various icons to denote critical notes and technical tips to assist you
with the installation of this system. These are easily seen in the left-hand column of
the relevant information.
– 4–