Cameras Speakertrack Connectordetection Cameraleft; Cameras Speakertrack Connectordetection Cameraright; Cameras Speakertrack Connectordetection Mode; Cameras Speakertrack Trackingmode - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Cameras SpeakerTrack TrackingMode

This setting applies only when using a Cisco TelePresence SpeakerTrack 60 camera, and
when Cameras SpeakerTrack Mode is set to Auto.
The speaker tracking algorithm can react to changes in two modes, one faster than the
other. The mode determines when the camera view will change to a new speaker.
Requires user role: USER
Default value: Auto
Value space: Auto/Conservative
Auto: Normal tracking mode.
Conservative: The camera view will change to a new speaker later than in Normal mode.

Cameras SpeakerTrack ConnectorDetection Mode

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected
to the codec (video system).
Define whether to automatically detect or manually configure which video input each
individual camera is connected to. You should choose manual configuration in situations
where the codec does not receive EDID information from the cameras. Typically, this will be
when you use HDMI repeaters that do not pass on EDID information.
Requires user role: USER
Default value: Auto
Value space: Auto/Manual
Auto: Automatically detect which video inputs the cameras are connected to.
Manual: Manually define which video inputs the cameras are connected to. Use the
Cameras SpeakerTrack ConnectorDetection CameraLeft and Cameras SpeakerTrack
ConnectorDetection CameraRight settings.
D15328.01 SX80 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals Maintenance

Cameras SpeakerTrack ConnectorDetection CameraLeft

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected
to the codec (video system). Furthermore, Cameras SpeakerTrack ConnectorDetection
Mode must be set to Manual.
Define the number of the video input that SpeakerTrack 60's left camera is connected to.
Requires user role: USER
Default value: 1
Value space: Integer (1..5)
Set a valid video input number. For example, set to 1 if the left camera is connected to
video input 1.

Cameras SpeakerTrack ConnectorDetection CameraRight

This setting applies only when a Cisco TelePresence SpeakerTrack 60 camera is connected
to the codec (video system). Furthermore, Cameras SpeakerTrack ConnectorDetection
Mode must be set to Manual.
Define the number of the video input that SpeakerTrack 60's right camera is connected to.
Requires user role: USER
Default value: 2
Value space: Integer (1..5)
Set a valid video input number. For example, set to 2 if the right camera is connected to
video input 2.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
86
Administrator Guide
System settings System settings Appendices