Audio Input Microphone [1..8] Equalizer Mode - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Audio Input Microphone [1..8] Equalizer Mode

Define the equalizer mode for the source that is connected to the microphone input.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: No equalizer.
On: Enable the equalizer for the source that is connected to the microphone input.
Audio Input Microphone [1..8] VideoAssociation
MuteOnInactiveVideo
The microphone can be associated with a video source on the video input connector, and
you can determine whether to play or mute audio depending on whether the video source is
presented or not. By default, audio is not muted.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: No video source is associated.
On: A video source is associated, and the audio will be muted if the associated video
source is not displayed.
Audio Input Microphone [1..8] VideoAssociation
VideoInputSource
Select the video input connector to associate the audio source with.
Requires user role: ADMIN
Default value: 1
Value space: 1/2/3/4/5
Select the video input connector to associate the audio source with.
D15328.01 SX80 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals Maintenance
Audio Input Microphone [1..8] Level
Define the audio level of the Microphone input connector.
See the Audio Level table in the Physical Interface Guide for the codec for a complete
overview of the values represented in dB.
Requires user role: ADMIN
Default value: 58
Value space: Integer (0..70)
Select a value between 0 and 70, in steps of 1 dB.
Audio Input Microphone [1..8] Mode
Define the audio input microphone mode.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the audio input microphone connector.
On: Enable the audio input microphone connector.
Audio Input Microphone [1..8] Type
The microphone connectors are intended for electret type microphones. The microphone
connector can be set to line or microphone mode.
Requires user role: ADMIN
Default value: Line
Value space: Line/Microphone
Microphone: Select Microphone when you have 48 V Phantom voltage and the pre-
amplification is On.
Line: Select Line when you have a standard balanced line input. The phantom voltage
and pre-amplification is Off.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
79
Administrator Guide
System settings System settings Appendices