Output Display
When the control panel is powered up, the panel displays the actual output
frequency. Whenever the MENU button is pressed and held, the control
panel resumes this OUTPUT display.
To toggle between output frequency and output current, press the UP or
DOWN button.
To set the output frequency, press ENTER. Pressing the UP/DOWN buttons
changes the output immediately. Press ENTER again to return to OUTPUT
display.
LOC
OUTPUT
LOC
OUTPUT
Menu Structure
ACS 140 has a large number of parameters. Of these, only the so-called
basic parameters are initially visible. The menu function -LG- is used to
make the full parameter set visible.
OUTPUT display
LOC
OUTPUT
Setting Parameter Value
Press ENTER to view the parameter value.
To set a new value, press and hold ENTER until SET is displayed.
Note! SET blinks, if the parameter value is altered. SET is not displayed, if
the value cannot be altered.
Note! To view the parameter default value, press the UP/DOWN buttons
simultaneously.
4
(17(5
Hz
A
(17(5
Parameter groups
LOC
Hz
0(18
0(18
PAR
CANCEL
STORE
LOC
(17(5
OUTPUT
M EN U
(17(5
0(18
(17(5
Hz
6(7
Parameters
LOC
(17(5
0(18
s
6(7