Introduction - ABB ACS 140 Programming Manual

Introduction

This guide provides the information necessary to use the ACS 100-PAN
control panel to set-up, use, and fault diagnose the ACS 140 frequency
converter.
The ACS 140 is configured at the factory in the way that is described in the
ACS 140 User's Guide. The ACS 140 can be used in many applications
without any need for further configuration.
By using the ACS 100-PAN control panel it is possible to select from a range
of pre-defined application macros, providing an easy way to set up the
ACS 140 for various applications. It is possible to further customise these
macros with the control panel to make them fit better for user's needs.
About This Manual
The manual is divided into following chapters:
"Control Panel" describes how to use the ACS100-PAN control panel for
configuring the drive parameters.
"Diagnostics" lists alarm and fault codes displayed by the control panel,
possible causes and remedies.
"ACS140 Basic Parameters" contains a list and description of the most
important parameters. Only these parameters are initially visible from the
control panel.
"Application Macros" lists all available application macros and gives
connection examples.
"Complete Parameter List" gives a full description of all ACS140 features.
"APPENDIX" gives advanced information regarding the configuration of start,
stop and direction commands and frequency references.
Related Publications
ACS 140 User's Guide
1