Enabling Access To Ultrasync + - Interlogix ZEROWIRE ZW-6404 Installation Manual

Enabling Access to UltraSync + app
For security, the UltraSync + app is disabled by default. Follow these steps to enable it:
MENU
1.
YOUR 4 TO 8 DIGIT INSTALLER CODE
2.
3.
8 DIGIT CODE
4.
( ( CODE FLASHES ON KEYPAD ) )
5.
6. MENU
Alternatively, you may use the Web Server:
1. Log in to the ZeroWire Web Server from your mobile device using the installer account.
2. Click Settings.
3. Click Network.
4. Enter a Web Access Passcode:
ZeroWire Installation Manual
9
ENTER
9
ENTER
MENU
Select main menu - Option 9, Advanced system
configuration
Enter your Installer code
Change Web Access Passcode
Enter a new Web Access Passcode
Passcode will flash on keypad for confirmation
Exits from Advanced system configuration menu
39