Dlx900 Software - Interlogix ZEROWIRE ZW-6404 Installation Manual

DLX900 Software

DLX900 is a fully featured management tool for control rooms and security professionals.
Compatible with Microsoft Windows 7, 8 and 10, DLX900 is available from your ZeroWire
service provider.
In order for DLX900 to connect to a ZeroWire panel you will need:
• the IP address of the ZeroWire (or use the Discover feature for LAN connections)
• the Download Access Code (see Troubleshooting section on page 99) and
• if Always Allow DLX900 is enabled then you will be allowed to connect,
if Always Allow DLX900 is disabled then you must first put the ZeroWire into program
mode, this can be changed in Settings-Network.
1. Install and launch DLX900 software.
2. Login to DLX900 with utc 1234. You will need to enter it twice.
3. Create a New Customer.
4. Select ZeroWire for the Panel.
5. Enter the TCP/IP address of the ZeroWire, port 41796, then click Save.
ZeroWire Installation Manual 99