Interlogix ZEROWIRE ZW-6404 Installation Manual page 29

10. Click the WiFi network name you wish ZeroWire to connect to.
11. Enter the customer's WiFi passcode then click OK. The following message will appear:
The ZeroWire will disconnect from your device, then attempt to connect to the
customer's WiFi network you selected. The webpage on your device will stop
responding, this is normal.
12. On your mobile device, connect to the same WiFi network you selected in step 10.
13. On the ZeroWire press Menu – 8 – [PIN] – 6 and note the IP address announced. If
you hear "IP address is not configured" then wait a further 30 s and repeat this step.
14. Open your web browser and enter http://[IP address]. The ZeroWire login screen
should appear:
ZeroWire Installation Manual 29