Setting Up - Interlogix ZEROWIRE ZW-6404 Installation Manual

Setting Up Connections
Selecting a Permanent Connection Mode
Select a method to connect your ZeroWire to a network so it can report events via
UltraSync, and allow you to configure settings using the built-in Web Server or UltraSync +
app.
1. Wireless LAN Setup – this connects the ZeroWire to a local WiFi network. You will
need to provide an internet connection and wireless router for the permanent
connection. A mobile device such as a smart phone or tablet is needed to set up this
connection.
2. Wired LAN Setup – this is the easiest to set up but requires a physical Ethernet
connection to the ZeroWire. You will need to also provide an Ethernet router and an
internet connection for reporting and remote access.
To select between Wireless LAN or Wired LAN modes:
MENU
1.
YOUR 4 TO 8 DIGIT INSTALLER CODE
2.
3.
4. MENU
3. 3G Cellular Radio Setup – this provides a plug and play connection to UltraSync
servers for secure reporting with no configuration needed in most cases. The only
requirement is good mobile phone reception.
To connect via Cellular Radio you only need to plug in the cellular radio module.
26
9
ENTER
7
MENU
WiFi LAN
Wired LAN
Select main menu - Option 9, Advanced system
configuration.
Enter your Installer code.
Toggle between Wireless LAN and Wired LAN
connection modes.
Exits from Advanced system configuration menu.
Primary Path –
wireless LAN or wired LAN
Secondary Path –
cellular 3G