Upgrading Firmware Using Dlx - Interlogix ZEROWIRE ZW-6404 Installation Manual

Do not know Download Access
Code

Upgrading Firmware using DLX900

Upgrading firmware can be performed remotely using DLX900.
1. Check with your supplier to download the latest firmware file for your device.
2. Open DLX900.
3. Connect to your device. TCP/IP over Ethernet is recommended for faster speed.
4. Click Devices – Device Info:
5. Click Update Control.
6. Select the firmware file. This should be a MIF3 file.
7. Click OK.
8. Wait for the firmware files to transfer to your device(s).
ZeroWire Installation Manual
Log in to ZeroWire Web Server and go to Settings – Network. Generally this
will need to be done on-site with an internet browser.
At factory default, DLX900 will automatically allow a connection using the
default Go To Program Code / Installer Code of 9713, even if the Download
Access Code is unknown or set to default of 00000000 (disable
upload/download). This is a convenience feature for installers and control
rooms when a system is first installed.
This is why you must change the Installer Code to protect the system from
further changes. Once the Installer Code has been changed, this feature no
longer works and you must have the correct Download Access Code.
101