Table of Contents
Advertisement
WiFi point. Disable this feature or use a different device if it is unable to stay
connected.
The ZeroWire will accept only the first device that attempts to connect and there is no
WiFi password. Multiple devices cannot connect at the same time. If you need to try
from another device, turn off WiFi Discovery Mode and then back on.
4. Open your web browser and enter http://192.168.1.3. The ZeroWire login screen
should appear:
5. Enter your username and password, by default this is "installer" and "9713"
6. Click Sign In, you should now see a screen similar to the one below:
Note:
The set of menus displayed depends on the access rights of the user logged in the
system. The screen above shows default installer menus, but they can be different for a
Master User, standard user, and an installer with Master User rights. For more information,
see "Access rights and available menus" on page 37. The same applies to the UltraSync +
app.
7. Click Settings.
8. Click the drop down menu and select WiFi Setup.
9. Click Scan for Wireless Networks and wait for scanning to complete:
28
Hide quick links:
Advertisement
Table of Contents
