Interlogix ZEROWIRE ZW-6404 Installation Manual page 77

1. Touch Menu
2. Select Scenes under the Settings Selector.
3. Select the Scene to Configure and type a Scene Name.
4. Select the Scene Trigger.
5. Select Alarm System under Action Device.
6. Select Trigger Camera Video Clip under Action Type.
7. Select the Camera(s) which will record when the scene is triggered.
8. Clips are recorded on the Micro SD card installed in the camera and are linked to
events in History.
Troubleshooting Cameras
• The panel and camera must be on the same subnet. Check IP address of panel and
camera. For example, 192.168.33.xxx, first three sets of numbers must match on both
devices.
• Check device is communicating on network. Use a command prompt (cmd) in
Windows to ping the panel and the camera. If both reply successfully then your device
is connected correctly on the network. Alternatively, 3
and tools may be of assistance during installation.
• Check the Settings – Connection Status web page. UltraConnect / UltraSync Status
must show connected. If not, contact your service provider for help. The panel must be
"provisioned" and added to the web portal in order to authenticate to the cloud servers
which the cameras will connect to.
• Only cameras specified for use with your panel will work. These cameras have
additional encryption and security to protect against unauthorised 3
• Live video streams can only be viewed from the app. Try switching your smartphone
between mobile data and WiFi to try a different connection.
ZeroWire Installation Manual
then Settings.
rd
party network scanning apps
rd
party access.
77