Enable Remote Web Access - Interlogix NX-595E Installation Manual

Enable Remote Web Access

To enable remote web page and iPhone app access for your customer:
1. Look for the serial number label on the back of the NX-595E PCB.
WRITE THIS SERIAL NUMBER ON THE BACK OF THE USER MANUAL.
2. Find the IP address of your NX-595E. This is stored in Device 191, Location
21.
3. Enter the IP address into a web browser then login:
Username: installer
Password: 9713
Make sure your computer is on the same network as the NX-595E.
4. Go to Menu > Network Settings and change the Web Access PIN.
This 8 digit passcode grants access to the iPhone app and remote web
access.
WRITE THIS CODE ON THE BACK OF THE USER MANUAL.
The default passcode is 00000000 and it disables remote access.
5. Add a Username to your NX/NetworX System. In this example we've entered
"User1".
WRITE THIS USERNAME & PIN CODE ON THE BACK OF THE USER
MANUAL.
34 NX-595E Installation Manual