Interlogix ZEROWIRE ZW-6404 Installation Manual page 52

Recording Zone Names (optional)
You can also record the names of the first 64 zones using your voice.
Example: Record user name for zone 1
MENU
1.
YOUR 4 TO 8 DIGIT INSTALLER CODE
2.
3.
4.
1
5.
HOLD DOWN HISTORY KEY
( ( SPEAK NAME ) )
6.
7.
RELEASE HISTORY
8. MENU
Testing Zone Signal Level
Check the signal level of each zone once installed.
1. MENU
YOUR 4 TO 8 DIGIT INSTALLER CODE
2.
3.
TRIP DETECTOR
6.
8. MENU
If signal is low, then move zone to another location. Alternatively move your ZeroWire to a
more central location.
52
6
ENTER
4
ENTER
MENU MENU
4
ENTER
4
MENU MENU
Select main menu - Option 6, Basic system
configuration.
Enter your Installer code.
Select zone name recording.
Select zone 1.
Activate recording mode.
Record voice, maximum 2 seconds.
Stop recording mode.
Exit from the menu.
Select Main Menu - Option 4 – System Test
Enter your Installer code.
Select zone walk test
Trip each zone and listen to the voice feedback on the
panel.
Exit from the menu.