Programming; Access Codes - Interlogix Simon XTi-5 User Manual

Programming

To enter programming mode:
Note: Programming mode can only be entered if the system is disarmed.
1. Enter the Status & Settings menu.
2. Scroll until Programming is listed, press the Enter icon.
3. Enter your master code, and then press OK.
Note: You have four seconds between number presses to enter the code or
you will be returned to the home screen.
At this point, you are in the Programming menu. At this level, the following
submenus are accessible:
•

Access Codes

•
Security
•
Phone Numbers
•
Siren Options
•
System Tests
•
Interactive Services (Optional. Ask your dealer for more information.)
The sections below describe the options that you can program in each of the
programming submenus.
Access codes
There are three types of access codes:
Master code. The master code is your most powerful code and can be used for
all user operations including programming. The initial value of the master code is
123, 1234, 12345, or 123456, depending on the installer-programmed access
code length.
User codes 1 to 8. There are eight user codes, which can be used for many
user operations, but not programming or bypassing sensors. Initially, all user
codes are blank. A user code can be deleted by pressing Delete while the code
is being changed.
Duress code. The duress code, when used in place of another user code,
generates a silent duress alarm that is reported to the central monitoring station.
Initially, the duress code is blank. The duress code can be deleted by pressing
Delete while the code is being changed.
To add/edit access codes:
1. From the Programming screen, press ACCESS CODES.
2. To add or edit an access code, press the white field next to the access code.
3. Enter the new/edited code on the numbered keypad and press SAVE.
Simon XTi-5 User Manual 27