Table of Contents
Advertisement
9. Check that:
•
UltraSync Status should display "Connected",
•
Cell Service should display "Valid service",
•
Signal Strength should display a value between -91 to -51.
If it does not:
•
Check cellular connection:
1. Look at cell state, it should display "Connected".
2. Wait until cell state displays "Connected", click Reload to refresh the status.
3. Check signal level in Menu 4, 5 – signal level should be between -91 to -51.
4. Contact Tech Support for assistance.
•
Check radio module is correctly installed.
•
Check radio antenna is correctly installed or move the antenna to a higher location.
•
Check cable connection of Ethernet cable.
•
Check router settings.
36
Hide quick links:
Advertisement
Table of Contents
