Physical Installation
What You Need
•
ZeroWire and everything inside the box
•
Detectors and keyfobs you will add
•
List of users and PIN codes you wish to add
•
Receptacle NOT controlled by a switch to provide power
•
Small Phillips head screwdriver
•
Small Flathead screwdriver
•
Router supporting 802.11 b or 802.11g if using local WiFi features
•
Optional – desk stand
•
Optional – internal or external siren and strobe
Choosing a Location
When choosing a location for your ZeroWire there are a number of appliances and areas
to avoid which could interfere with the security system.
•
Choose a central location for the best reception to all wireless detectors and Z-Wave
devices
•
If the ZeroWire Cellular Radio is installed select a location with sufficient signal
•
Avoid TV and other electronic appliances
•
Avoid microwave ovens
•
Avoid wet and moist areas such as bathrooms and toilets
•
Avoid cordless telephones
•
Avoid computers and wireless equipment
Removing The Wall Bracket
1. Loosen the screw from a bottom of ZeroWire, this will allow the wall bracket to be
removed from the unit.
ZeroWire Installation Manual
19