Table of Contents
Advertisement
Adding RAM
3-2
You can install two memory expansion cards. The expansion card
can have 4, 8, 16, or 32 megabytes of RAM. Together with the
printer's resident memory (4 megabytes for 12M and 8 megabytes
for 12MX), these expansion options offer a range of RAM from 4 to
68 (12M) or 72 (12MX) megabytes.
(8MB card)
To install the RAM card, first make sure the printer is turned off and
follow these steps:
1. Open the upper door and
remove the right side
cover of the printer. To
remove the right side cover,
≠
remove screws
open the rear
while pulling it backwards.
You will see a connector
cover on the metal plate.
2. Remove the connector
cover. Remove the fastening
screw and the cover. You
can now see three
connectors (upper two ivory
ones for RAM cards).
Connector
cover
Insert with cut
facing down and
to the right
and ≠ and
of the cover
User's Manual
Advertisement
Table of Contents
