Table of Contents
Advertisement
Repacking the Printer
Repacking the
Printer
4-16
If you need to ship your printer or store it for an extended time,
protect it by packing it in its original carton.
Store the print unit separately from the printer. Do not remove the
developer unit from the drum unit. Close the shutter of the drum
unit to cover the photoconductive drum to avoid exposing the drum
to light, wrap the print unit with a protective material, and store it in
a safe place.
To protect the printer from moisture, place it in the plastic bag it
was shipped in. Seal the bag with tape.
Place the printer in its carton using the original packing materials to
brace and protect the printer. The illustration shows the position of
the printer components within the carton.
Repack as shown
User's Manual
Advertisement
Table of Contents
