Installing A Printer Driver - Fujitsu PRINTPARTNER User Manual

Installing a Printer Driver

Installing a
Printer Driver
1-22
The selected emulation is selected (an asterisk is followed). Once you
change the emulation, the other menus automatically change to
reflect the options and functions of the new emulation. For details of
the setup menu, see Chapter 2.
Now that you connected your printer to the parallel port of the
computer, you are ready to install a Windows printer driver into
your computer. The Windows printer driver is essential for
controlling your printer in Microsoft Windows environments.
Several printer drivers are contained in the attached software set
consisting of a CD-ROM and a floppy disk.
Printer drivers in the CD-ROM are:
• Standard drivers for Windows 95/98
• FPS drivers for Windows 95/98
• Standard driver for Windows NT 3.51
• Standard driver for Windows NT 4.0
• FPS driver for Windows NT 4.0
If your printer is 12M, note that the FPS drivers are only available
with an optional FPS card.
Printer drivers in the floppy disk are:
• Standard drivers for Windows 3.x
Standard drivers are to be installed when your printer is used as a
PCL printer and FPS drivers are to be installed when your printer is
used as a PostScript printer.
When you are using Windows 95/98 or Windows NT 4.0, it is
recommended that you should install a printer driver using
MarkVision™ because the printer driver is reinforced with
MarkVision™'s features such as remotely changing settings of a
network printer and checking status of a network printer. For
MarkVision™, see the next section.
User's Manual