Table of Contents
Advertisement
Action-required Status Indications
5-20
Message
TONER LOW n
Press Continue
TRAY n MISS SET
TRAY n PAPER OUT
MFF PAPER OUT
WAIT TIMEOUT
Causes and solutions
Cause: Toner low occurs when toner low
mode in the Config. menu is set to STOP.
1: First level; 2: Second level;
3: Third level and after
The printer stops when this codition is
detected (factory default).
Solution: • If you satisfy the print quality,
press the
button to continue
CONT.
printing. Prepare a new developer unit.
• If you satisfy the print quality and the
printer just displays this message (continue
mode), prepare a new developer unit.
• If you cannot satisfy the print quality,
replace the developer unit. Press the
button when the confirmation
ENTER
message is displayed after the upper door is
closed.
Cause: Paper tray installed incorrectly
Solution: Install the paper tray.
or Cause: Paper out in the specified paper
source
Solution: Supply paper.
Cause: Printer did not receive a job end in
the prescribed time. (This error occurs
when FPS emulation is active.)
Solution: Press the
button.
CONT.
User's Manual
Advertisement
Table of Contents
