Table of Contents
Advertisement
Warning
Messages
User's Manual
Message
READY
TONER LOW n
RESET
SELF TEST
WARMING UP
This printer counts the number of the printed sheets to estimate the
service-life of the consumables (developer unit and drum unit). The
printer indicates the following warning message when and after the
count reaches a predetermined value.
READY
REPLACE PARTS
When the warning message is indicated, press the
put the printer offline and press the
mode. The Clear Warning message appears, indicating the expired
unit by an asterisk. When the drum unit is expired, the message is:
<CLEAR WARNING>
DRUM UNIT*
However, depending on the print quality, you may not have to
replace the developer unit or drum unit because you may be satisfied
with the print quality.
Meaning
Toner runs short but printing is allowed.
(Toner low occurs when toner low mode
in the Config. menu is set to CONTINUE
or the
button is pressed when the
CONT.
printer is stopped because of a
LOW n
message.)
The printer displays this message when you
press
for five or more seconds. This
RESET
reset clears error latches, buffered data, and
temporary soft fonts.
The printer displays this message when you
press
for five or more seconds
SELF TEST
then press
. The printer is printing
ENTER
the status report.
The printer is warming up to its operating
temperature.
button to enter menu
MENU
Warning Messages
TONER
SOLVING
PROBLEMS
button to
READY
5-23
Advertisement
Table of Contents
