Fujitsu PRINTPARTNER User Manual page 58

User's Manual
Selecting Paper Tray, MFF, or Manual Feed Mode (
Pressing puts the printer in tray select mode which allows
SELECT
you to set paper sources in locked or unlocked status. In the locked
status, the paper source selection is fixed. In the unlocked status, the
paper source is automatically switched to another source in a certain
condition (auto tray selection). The paper sources are tray 1, tray 2
(if installed), MFF, and MFF in manual feed mode.
MFF
The MFF operation is controlled by MFF mode in which "first"
mode and "cassette" mode are provided.
First mode
The MFF has the highest priority and is selected first of all if
printing is requested. You do not need to set the paper size of the
MFF. (The MFF paper size menu is disabled.) The printer starts
printing assuming that the loaded paper has the job-specified size
of paper.
If you are printing using tray 1 or 2 with this mode set, you can
immediately switch the tray to the MFF just by putting paper on
the MFF. This is called on-demand printing.
Cassette mode (default)
The MFF is controlled in the same manner as for other paper
trays. However, it has the lowest priority as compared with trays 1
and 2. You must set the physical size of the paper loaded on the
MFF, using the MFF paper size menu. If the MFF paper size does
not match the job-specified size, a paper mismatch error occurs.
MFF in Manual Feed Mode
The MFF can also operate in manual feed mode in which you can
feed paper manually in response to a control panel message.
Operation slightly differs with the two modes of the MFF.
Control Panel Functions
)
SELECT
2-11
PRINTING AND
PAPER HANDLING