Installing An Alternate Emulation - Fujitsu PRINTPARTNER User Manual

Installing an
Alternate
Emulation
User's Manual
Alternate emulations are offered with emulation cards. You can use
these emulations to connect your printer to different computers. The
FPS card (PostScript Level 2 compatible) is available. Note that the
FPS emulation is standard for 12MX.
The installation procedure is the same as that for the RAM card
except that the emulation card uses the bottom connector.
To install the FPS emulation card, follow these steps:
1. If RAM cards are already installed, remove them.
2. Insert the emulation card into the bottom black connector.
3. Reinstall the RAM cards.
Caution:
After installing cards, be sure to secure the connector cover to avoid a
fire hazard. See the previous section for RAM cards.
With default settings, the printer automatically selects the active
emulation. To specify an emulation steadily, select the emulation
using the control panel. Use the Personality item of the Config
menu.
Once you change the emulation, the other menus change to reflect
the options and functions of the new emulation. Procedures for
working in the menus remain the same as for the PCL emulation.

Installing an Alternate Emulation

Use the bottom
black connector
ENHANCING &
CUSTOMIZING
3-5