Cut Sheet Feeder Replacement - Fujitsu ULTIMA90 Maintenance Manual

1. During pressing the Rock lever, Lift the left and right sides of the tractor unit, and then remove the tractor
unit.
Installation
1. Engage the U-grooves on the left and right sides of the tractor unit with the counterpart pins on the printer.
(fit the ditch of left pin, there is any ditch of the right pin)
2. Press down the front shaft of the tractor unit to lock the unit.

(2) Cut Sheet Feeder replacement

Front cut sheet feeder
Figure 4.6 Rear feed tractor removal
Figure 4.7 Rear feed tractor Installation
37