Technical Specifications; Certificates And Approvals - Siemens SIMATIC IPC547D Operating Instructions Manual

Technical specifications

8.1

Certificates and approvals

CE approval
The device meets the general and safety-related requirements of the EMC Directive
(2004/108/EC "Electromagnetic Compatibility") and conforms to the harmonized European
standards (EN) for programmable logic controllers published in the official gazettes of the
European Union:
● 94/9/EC "Equipment and protective systems for use in potentially explosive atmospheres"
EC Declaration of Conformity
The EC declarations of conformity are available for the relevant authorities at the following
address:
Siemens Aktiengesellschaft
Industry Sector
I IA AS RD ST PLC
P.O. Box 1963
D-92209 Amberg, Germany
DIN ISO 9001 certificate
The Siemens quality management system for all production processes (development,
production and sales) meets DIN ISO 9001:2000 requirements.
This has been certified by DQS (the German society for the certification of quality
management systems).
EQ-Net certificate no.: DE-001108 QM
Software license agreements
If the device is supplied with installed software, observe the corresponding license
agreements.
UL approval
The following approval is available for the device: Underwriters Laboratories (UL) to standard
UL 60950-1, File no. E11 5352 and Canadian National Standard CAN/CSA-C22.2
No. 60950-1-07 (I.T.E).
SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01
(explosion protection directive)
8
89