Siemens SIMATIC IPC547D Operating Instructions Manual page 78

Device maintenance and repair
7.2 Installing the software
Retrieving authorizations or license keys from the hard disk
● Check whether you can retrieve your authorization or license key from the hard disk and
● If backup is not possible, please contact Customer Support. There you can obtain
Procedure
1. Insert the Restore DVD into the DVD drive.
2. Restart the device with the on/off button.
3. Press the <F12> key when the following BIOS message appears.
4. Select the optical drive with your cursor keys which is identified with a "P" in front of the
5. Follow the on-screen instructions.
78
perform this procedure if possible.
information necessary for software authorization.
CAUTION
If "Restore system partition only" is set all data on drive C: (system partition) will be
deleted. All data, user settings and all authorizations or license keys on drive C: are lost!
All data on drive C: of the hard disk will be deleted. Setup formats the hard disk and
installs the original factory software.
If "Restore entire hard disk" is set ALL data, user settings, authorizations or license keys
will be lost on the hard disk.
Press <F2> to go to Setup Utility
Press <F12> to go to Boot Manager
The "Boot Menu" is displayed when initialization is completed.
SATA port number.
Example:
P3 - OPTIARC DVD-ROM DDU1681S
CAUTION
All existing data, programs, user settings, authorizations and license keys on the drives
will be deleted and are thereby lost.
.
Operating Instructions, 06/2011, A5E03473780-01
SIMATIC IPC547D