6.5
Disk drives
6.5.1
Installation options for drives
The drive module consists of horizontal slots and the vertical slot. A DVD-ROM, a DVD
burner and a removable rack may be installed in the slots, depending on the order.
6.5.2
Removing the drive module
Requirement
● The device is disconnected from the power network.
● The device is opened.
● T10 screwdriver
Procedure
1. Open the hinged front panel.
2. Open the front cover.
3. Remove the highlighted screws.
4. Remove the power supply and data cables from the drives.
SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01
Installing hardware expansions
①
Horizontal slots 5.25"
②
Vertical slot
6.5 Disk drives
61