Procedure - Installing a drive in the removable rack
1. Carefully push the drive into the hard disk cartridge.
2. Secure the drive with the four screws on the base of the hard disk cartridge. Use only the
3. Close the lever of the hard disk cartridge again.
4. Return the locking switch to the "LOCK" position.
SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01
Do not touch the contacts.
original screws.
NOTICE
Damage to the hard disk cartridge
You can damage the hard disk cartridge by closing the lever prematurely.
Always slide the hard disk cartridge completely into the removable rack before you close
the lever.
An audible tone signals that the removable rack is locked into position.
Installing hardware expansions
6.5 Disk drives
65