Removing The Device Fan - Siemens SIMATIC IPC547D Operating Instructions Manual

Procedure
1. Press the marked hooks at the same time to release the front cover.
2. Move the front cover in the direction of the arrow.
3. Remove the front panel.
4. Remove the filter from the front cover.
7.1.4

Removing the device fan

Requirement
● The device is disconnected from the power network
● The front panel cover is open
● T20 screwdriver
● A fan
Procedure - Removing the fan
1. Press the marked hooks at the same time to release the front cover.
2. Move the front cover in the direction of the arrow.
3. Remove the front panel.
4. Open the housing cover.
5. Pull the fan plug from the motherboard.
SIMATIC IPC547D
Operating Instructions, 06/2011, A5E03473780-01
Use only a fan of the same type.
Device maintenance and repair
7.1 Removing and installing hardware components
69