Eaton EDR 3000 Installation, Operation And Maintenance Manual page 463

Device Planning Parameters of the 51R Ground Fault Protection
Parameter Description
Mode Mode
Global Protection Parameters of the 51R Ground Fault Protection
Parameter Description
ExBlo1 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
ExBlo2 External blocking of the module, if blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
ExBlo TripCmd External blocking of the Trip Command of the module/the
element, if blocking is activated (allowed) within a
parameter set and if the state of the assigned signal is
true.
Rvs Blo Reverse Blocking, if Reverse Blocking is activated
(allowed) within a parameter set and if the state of the
assigned signal is true.
AdaptSet 1 Assignment Adaptive Parameter 1
AdaptSet 2 Assignment Adaptive Parameter 2
EDR-3000
Options
51R[1]: Non-directional
51R[2]: Do not use,
Non-directional
Setting range
1..n, Assignment
List
1..n, Assignment
List
1..n, Assignment
List
1..n, Assignment
List
AdaptSet
AdaptSet
www.eaton.com
Default Menu path
Non-directional [Device Planning]
Default Menu path
-.- [Protection Para
/Global Prot Para
/I-Prot
/51R[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51R[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51R[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51R[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51R[1]]
-.- [Protection Para
/Global Prot Para
/I-Prot
/51R[1]]
IM02602003E
451