Eaton EDR 3000 Installation, Operation And Maintenance Manual page 132

Parameter Description
t-Timeout Force The Output State will be set by force for the duration of
this time. That means, for the duration of this time, the
Relay Output does not show the state of the signals that
are assigned on it.
Only available if: Mode = Timeout DISARM
EDR-3000
Setting range
0.00 - 300.00s
www.eaton.com
IM02602003E
Default Menu path
0.03s [Service
/Test Mode (Prot
inhibit)
/WARNING! Cont?
/Force RO
/RO-3ZI X2]
120