Eaton EDR 3000 Installation, Operation And Maintenance Manual page 401

Breaker Wear Signals (Output States)
Signal
Operations Alarm
Isum Intr trip: IA
Isum Intr trip: IB
Isum Intr trip: IC
Isum Intr trip
Res TripCmdCr
Res Isum trip
WearLevel Alarm
WearLevel Lockout
Res Bwear Curve
Isum Intr ph Alm
Res Isum Intr ph Alm
EDR-3000
Description
Signal: Service Alarm, too many Operations
Signal: Maximum permissible Summation of the interrupting (tripping) currents exceeded: IA
Signal: Maximum permissible Summation of the interrupting (tripping) currents exceeded: IB
Signal: Maximum permissible Summation of the interrupting (tripping) currents exceeded: IC
Signal: Maximum permissible Summation of the interrupting (tripping) currents exceeded in at
least one phase.
Signal: Resetting of the Counter: total number of trip commands
Signal: Reset summation of the tripping currents
Signal: Breaker Wear curve Alarm
Signal: Breaker Wear Curve Lockout Level
Signal: Reset of the Breaker Wear maintenance curve.
Signal: Alarm, the per hour Sum (Limit) of interrupting currents has been exceeded.
Signal: Reset of the Alarm, "the per hour Sum (Limit) of interrupting currents has been exceeded".
www.eaton.com
IM02602003E
389