Eaton EDR 3000 Installation, Operation And Maintenance Manual page 395

Direct Commands of the Switching Authority
Parameter Description
Switching Authority Switching Authority
Signals of the Switching Authority
Signal
Local
Remote
SG Indeterm
SG Disturb
Counters of the Switching Authority
Parameter
CES SAuthority
CES DoubleOperating
No. of rej. Com
The following Signals can trigger the Sync-check:
EDR-3000
Description
Switching Authority: Local
Switching Authority: Remote
Minimum one Switchgear is moving (Position cannot be determined).
Minimum one Switchgear is disturbed.
Description
Command Execution Supervision: Switching Command not executed. No switching authority.
Command Execution Supervision: A second switch command is in conflict with a pending one.
No. of rej. Com because Locked by ParaSystem
www.eaton.com
Setting range Default
None, Local
Local,
Remote,
Local and Remote
IM02602003E
Menu path
[Control
/General Settings]
383