Eaton EDR 3000 Installation, Operation And Maintenance Manual page 185

Energy Units (applies only for devices with energy measurement)
By means of the parameter » Energy Units« the User can determine how measured values are to be displayed within
the HMI and PowerPort-E :
Energy Auto Scaling
kWh, kVArh or kVAh
MWh, MVArh or MVAh
GWh, GVArh or GVAh
In case of an overflow of the counter, the counter will start counting again at zero. A corresponding signal will indicate
the counter overflow.
Energy Auto Scaling
kWh, kVArh or kVAh
MWh, MVArh or MVAh
GWh, GVArh or GVAh
Temperature Unit (applies only for devices with temperature measurement)
By means of the parameter » Temperature Unit« the User can determine how measured values are to be displayed
within the HMI and PowerPort-E :
° Celsius
° Fahrenheit
EDR-3000
Counter overflow at:
Depends on the settings for the current and voltage transformers
999,999.99
999,999.99
999,999.99
www.eaton.com
IM02602003E
173