Eaton EDR 3000 Installation, Operation And Maintenance Manual page 102

Signals of RO-3 X
Signal
RO 1
RO 2
RO 3
DISARMED!
Outs forced
EDR-3000
Description
Signal: Relay Output
Signal: Relay Output
Signal: Relay Output
Signal: CAUTION! RELAYS DISARMED in order to safely perform maintenance while eliminating
the risk of taking an entire process off-line. (Note: Zone Interlocking and Supervision Contact
cannot be disarmed). YOU MUST ENSURE that the relays are ARMED AGAIN after maintenance
Signal: The State of at least one Relay Output has been set by force. That means that the state of
at least one Relay is forced and hence does not show the state of the assigned signals.
www.eaton.com
IM02602003E
90